Link Monitoring And Remote Management; Device Ha Screens; Vrrp Group Summary - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

Unified security gateway
Hide thumbs Also See for Unified Security Gateway ZyWALL 1000:
Table of Contents

Advertisement

Chapter 33 Device HA

33.2.1 Link Monitoring and Remote Management

With link monitoring enabled, a backup ZyWALL that takes over for an unavailable master
ZyWALL takes over all of the master ZyWALL's static IP addresses. This way the backup
ZyWALL takes over all of the master ZyWALL's functions. However, this also means you
can no longer access the original master ZyWALL through one of its static IP addresses
(because the backup ZyWALL now uses this address). Do one of the following to still be able
to access the original master ZyWALL (assuming it is still functioning).
• Use a DHCP client interface. The DHCP server assigns the backup ZyWALL an IP
address that is different from the IP address assigned to the master ZyWALL. So you can
still access the original master ZyWALL through its DHCP assigned IP address. You will
need some way to know the dynamic IP address assigned to the master ZyWALL's
interface. One way is to set the master ZyWALL to use DDNS. Or, if you have access to
the DHCP server, you can check it to see what IP address it assigned to the master
ZyWALL.
• Use a static IP address on one of the master ZyWALL's interfaces without adding that
interface to any VRRP group. Also leave the corresponding port on the backup ZyWALL
unconnected. This way the original master ZyWALL still uses the static IP address after
the backup ZyWALL takes over for it.
• Connect an external serial modem to the AUXport and configure dial-in management.

33.3 Device HA Screens

The VRRP Group summary screen provides information about which interfaces are in virtual
routers and the role and status of each interface in the virtual router.
The VRRP Group Add/Edit screen allows you to add VRRP groups to the ZyWALL or to
edit the configuration of an existing VRRP group. You have to go to the VRRP Group
summary screen first to access this screen.
You can use the Synchronize screen to make sure all ZyWALLs in the VRRP group have the
same updated certificates, AV signatures, IDP and application patrol signatures, system
protect signatures, and configuration information, regardless of whether each router is the
master router or a backup router.

33.4 VRRP Group Summary

The VRRP Group summary screen provides information about which interfaces are in virtual
routers and the role and status of each interface in the virtual router. To access this screen,
click Device HA.
496
ZyWALL USG 1000 User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall usg 1000

Table of Contents