Chapter 9 Command Interpreter; Command Syntax; Command Usage - ZyXEL Communications ZyWall 10 Reference Manual
Internet security gateway
Hide thumbs
Also See for ZyWall 10:
- User manual (536 pages) ,
- Quick start manual (11 pages) ,
- User manual (495 pages)
Table of Contents
Advertisement
The following describes how to use the command interpreter. Enter 24 in the main menu to bring up the
system maintenance menu. Enter 8 to go to Menu 24.8 - Command Interpreter Mode. See the included
disk or zyxel.com for more detailed information on these commands.
Use of undocumented commands or misconfiguration can damage the unit and
Command Syntax
The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means "or".
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.
Command Usage
A list of valid commands can be found by typing help or ? at the command prompt. Always type the full
command. Type exit to return to the SMT main menu when finished.
Command Interpreter
ZyWALL 10~100 Series Internet Security Gateway
Command Interpreter
possibly render it unusable.
Chapter 9
9-1
Advertisement
Table of Contents
