Id Type And Content Examples - ZyXEL Communications P-792H User Manual

Table 52 Peer ID Type and Content Fields
PEER ID
TYPE=
IP
DNS
E-mail

12.9.9.1 ID Type and Content Examples

Two IPSec routers must have matching ID type and content configuration in order
to set up a VPN tunnel.
The two P-792H v2s in this example can complete negotiation and establish a VPN
tunnel.
Table 53 Matching ID Type and Content Configuration Example
P-792H V2 A
Local ID type: E-mail
Local ID content:
tom@yourcompany.com
Peer ID type: IP
Peer ID content: 1.1.1.2
The two P-792H v2s in this example cannot complete their negotiation because P-
792H v2 B's Local ID type is IP, but P-792H v2 A's Peer ID type is set to E-
mail. An "ID mismatched" message displays in the IPSEC LOG.
Table 54 Mismatching ID Type and Content Configuration Example
P-792H V2 A
Local ID type: IP
Local ID content: 1.1.1.10
Peer ID type: E-mail
Peer ID content: aa@yahoo.com
P-792H v2 User's Guide
CONTENT=
Type the IP address of the computer with which you will make the VPN
connection or leave the field blank to have the P-792H v2 automatically
use the address in the Secure Gateway Address field.
Type a domain name (up to 31 characters) by which to identify the
remote IPSec router.
Type an e-mail address (up to 31 characters) by which to identify the
remote IPSec router.
The domain name or e-mail address that you use in the Content field is
used for identification purposes only and does not need to be a real
domain name or e-mail address. The domain name also does not have to
match the remote router's IP address or what you configure in the
Secure Gateway Address field below.
P-792H V2 B
Local ID type: IP
Local ID content: 1.1.1.10
Peer ID type: IP
Peer ID content: N/A
P-792H V2 B
Local ID type: IP
Local ID content: 1.1.1.2
Peer ID type: E-mail
Peer ID content: tom@yourcompany.com
Chapter 12 VPN
181