Wan1 (Zynos Zywall With One Wan Port); Figure 32 Device Operation > Device Configuration > Network > Wan > Wan1 (Zynos Zywall With One Wan Port) - ZyXEL Communications Centralized Network Management Vantage CNM User Manual

Table 17 Device Operation > Device Configuration > Network > WAN > General (ZyNOS
ZyWALL) (continued)
LABEL
Allow between
WAN2 and
DMZ
Allow between
WAN2 and
WLAN
Allow Trigger
Dial
Apply
Reset

5.3.1 WAN1 (ZyNOS ZyWALL with one WAN port)

The screen differs by the encapsulation type chosen.
Figure 32 Device Operation > Device Configuration > Network > WAN > WAN1 (ZyNOS
ZyWALL with one WAN port)
Vantage CNM User's Guide
DESCRIPTION
Select this check box to forward NetBIOS packets from the WAN2 port to the DMZ
port and from the DMZ port to WAN2.
Clear this check box to block all NetBIOS packets going from the WAN2 port to the
DMZ port and from DMZ port to WAN2.
Select this check box to forward NetBIOS packets from the WAN2 port to the WLAN
port and from the WLAN port to WAN2.
Clear this check box to block all NetBIOS packets going from the WAN2 port to the
WLAN port and from WLAN port to WAN2.
Select this option to allow NetBIOS packets to initiate calls.
Click Apply to save your changes back to the device.
Click Reset to begin configuring this screen afresh.
Chapter 5 Device Network Settings
69