Figure 130 Device Operation > License Management > Service Activiation > Registration > Save As A Bb - ZyXEL Communications Centralized Network Management Vantage CNM User Manual

Chapter 11 License Management
Figure 130 Device Operation > License Management > Service Activiation > Registration >
Save as a BB
Enter the name of the new building block, and click Apply. The name must be 1-32
alphanumeric characters or underscores (_). It cannot include spaces. The name is case-
sensitive.
The following table describes the labels in this screen.
Table 114 Device Operation > License Management > Service Activation > Registration
LABEL
Device Registration
New myZyXEL.com
account
Existing myZyXEL.com
account
User Name
Check
Password
Confirm Password
E-Mail Address
Country
Service Activation
Content Filtering 1-
month Trial
Anti Spam 3-month
Trial
IDP/AV 3-month Trial
Apply
Reset
242
DESCRIPTION
If you select Existing myZyXEL.com account, only the User Name and
Password fields are available. Click Save as a BB to save the current
setting as a component building block.
If you haven't created an account at myZyXEL.com, select this option and
configure the following fields to create an account and register your device.
If you already have an account at myZyXEL.com, select this option and enter
your user name and password in the fields below to register your device.
Enter a user name for your myZyXEL.com account. The name should be
from six to 20 alphanumeric characters (and the underscore). Spaces are not
allowed.
Click this button to check with the myZyXEL.com database to verify the user
name you entered has not been used.
Enter a password of between six and 20 alphanumeric characters (and the
underscore). Spaces are not allowed.
Enter the password again for confirmation.
Enter your e-mail address. You can use up to 80 alphanumeric characters
(periods and the underscore are also allowed) without spaces.
Select your country from the drop-down box list.
These are trial service subscriptions. After the trial expires, you can buy an
iCard and enter the license key in the Device Operation > License
Management > Service Activation > Service screen to extend the service.
Select the check box to activate a trial. The trial period starts the day you
activate the trial.
Select the check box to activate a trial. The trial period starts the day you
activate the trial.
Select the check box to activate a trial. The trial period starts the day you
activate the trial.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
Vantage CNM User's Guide