Table of Contents
Advertisement
Chapter 5 Device Network Settings
Figure 27 Device Operation > Device Configuration > Network > LAN > LAN
The following table describes the fields in this screen.
Table 13 Device Operation > Device Configuration > LAN > LAN
LABEL
DHCP Mode
IP Pool Starting
Address
DHCP Server IP
60
DESCRIPTION
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients (workstations) to obtain TCP/IP configuration at startup from a
server. Unless you are instructed by your ISP, leave this field set to Server. When
configured as a server, the device provides TCP/IP configuration for the clients.
When set as a server, fill in the IP Pool Starting Address and Pool Size fields.
Select Relay to have the device forward DHCP requests to another DHCP
server. When set to Relay, fill in the DHCP Server IP field.
Select None to stop the device from acting as a DHCP server. When you select
None, you must have another DHCP server on your LAN, or else the computers
must be manually configured.
This field specifies the first of the contiguous addresses in the IP address pool.
Type the IP address of the DHCP server to which you want the device to relay
DHCP requests. Use dotted decimal notation. Alternatively, click the right mouse
button to copy and/or paste the IP address.
Vantage CNM User's Guide
Advertisement
Table of Contents
Troubleshooting
