Figure 5-2 Menu 2.1 Advanced Wan Setup; Response Strings; Table 5-2 Advanced Wan Port Setup - At Commands Fields - ZyXEL Communications ZyWall 100 User Manual

ZyWALL 100 Internet Security Gateway
5.4.3

Response Strings

The response strings tell the ZyWALL the tags, or labels, immediately preceding the various call parameters
sent from the WAN device. The response strings have not been standardized; please consult the
documentation of your WAN device to find the correct tags.
To edit the advanced setup for the Dial Backup port, move the cursor to the Edit Advanced Setup field in
Menu 2 - WAN Setup, press the [SPACE BAR] to select Yes and then press [ENTER].
AT Command Strings:
Dial= atdt
Drop= ~~+++~~ath
Answer= ata
Drop DTR When Hang Up= Yes
AT Response Strings:
CLID= NMBR =
Called Id=
Speed= CONNECT
The following table describes fields in this menu.
Table 5-2 Advanced WAN Port Setup — AT Commands Fields
FIELD
AT Command
Strings:
Dial Enter the AT Command string to make a call.
Drop Enter the AT Command string to drop a call. "~" represents a one
Answer Enter the AT Command string to answer a call.
Drop DTR When
Hang Up
5-4
Menu 2.1 - Advanced WAN Setup

Figure 5-2 Menu 2.1 Advanced WAN Setup

second wait, e.g., "~~~+++~~ath" can be used if your modem has a
slow response time.
Press the [SPACE BAR] to choose either
is selected (the default), the DTR (Data Terminal Ready) signal is
dropped after the "AT Command String: Drop" is sent out.
Call Control:
Dial Timeout(sec)= 60
Retry Count= 0
Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Call Back Delay(sec)= 15
DESCRIPTION
Yes or No. When Yes
DEFAULT
atdt
+++ath
ata
Yes
WAN Setup