Responded Alarm - ZyXEL Communications Centralized Network Management Vantage CNM User Manual

The following table describes the fields in this screen.
Table 134 Monitor > Device Alarm > Unresolved Alarm
STATE
Device Name/
Folder Name
Platform
Category
Severity
Time Period
Retrieve
Page Size
#
Device Name
Category
Severity
Time
Message
Source
Destination
Respond
Clear
Total Records
Clear All
Respond All
Export

17.1.5 Responded Alarm

Responded alarms are alarms that have been responded by an administrator.
Vantage CNM User's Guide
DESCRIPTION
This field displays the selected device or folder.
This is available if you select a folder. Select the platform you wish to view.
Select the type of alarm you wish to view.
Select the severity of alarm you wish to view.
Select the time period for which you wish to view alarms.
Click this to update the list of alarms based on the specified criteria.
This is the number of an individual entry.
This field displays the name of the device that generated the alarm.
This field displays the type of alarm.
This field displays the alarm severity.
This field displays the time the alarm occurred.
This field displays the reason the alarm occurred.
This field lists the source IP address and the port number of the incoming packet.
This field lists the destination IP address and the port number of the incoming
packet.
Click this to take responsibility for finding the cause of this alarm and move this
record from this screen to the Device Alarm > Responded Alarm screen.
Click this to remove the alarm from the monitor. See
This entry displays the total number of records on the current page of the list.
Click this to remove all of the alarms in the list from the monitor. See
17.1.5 on page 273.
Click this to respond to all of the alarms in the list.
Click this to export the current information in this screen to an AlarmStore.csv file.
Chapter 17 Device Alarm
Section 17.1.5 on page 273.
Section
273