Device > Upgrade - ZyXEL Communications Centralized Network Management Vantage CNM User Manual

The following table describes the fields in this screen.
Table 112 Device Operation > Firmware Management > Firmware Upgrade (Device)
TYPE
#
FW Alias
Device Type
FW Version
FW Release Time
Admin
Upgrade
Total Records
Back
10.3.3 Device > Upgrade
Use this screen to perform the firmware upgrade to the selected device right away or define a
schedule for it. To open this screen, click Upgrade on a firmware entry in the Device
Operation > Firmware Management > Firmware Upgrade screen (Refer to
page 238 ).
Figure 128 Device Operation > Firmware Management > Firmware Upgrade (Device) >
Upgrade
Vantage CNM User's Guide
DESCRIPTION
This field displays the device number.
This is a descriptive name for the firmware. This is specified when the firmware
is uploaded. See Section 10.1.1 on page
This field displays the model. You must upload firmware to the correct model.
Vantage CNM should automatically detect firmware for the device selected.
Uploading incorrect firmware may damage the device.
This field displays ZyXEL device firmware version. It is blank if the device has
not been registered.
This field displays the date the firmware was created.
This field displays the administrator who downloaded this firmware file to
Vantage CNM.
Click Upgrade to take you to a screen where you can upgrade the selected
firmware to the device.
This entry displays the total number of records on the current page of the list.
Click Back to return to the previous screen.
Chapter 10 Firmware Management
236.
Figure 127 on
239