Table of Contents
Advertisement
Chapter 18 Device Operation Report
Figure 161 Log & Report > Operation Report > Configuration File Backup & Restore Report
> Backup Report (Group) > Show Detail
The following table describes the labels in this screen.
Table 141 Log & Report > Operation Report > Configuration File Backup & Restore Report >
Backup Report (Group) > Show Detail
LABEL
Group File Name This displays the group configuration backup file name for this report.
Page Size
#
Device Name
Device Type
Firmware
Version
Status
Total Records
Back
18.4 Configuration File Restore Report
Use this screen to look at configuration file restore records for a device or groups. Refer to
Section 9.2.1 on page
click Operation Report > Configuration File Backup & Restore Report > Restore Report
in the navigation panel.
286
DESCRIPTION
Select this from the list box to set up how many records you want to see in each
page.
This is the number of an individual entry.
This field displays the device name of the operation. You can click the label to sort
by this column.
This field displays the device type of the operation. You can click the label to sort
by this column.
This field displays the firmware version of the device when this operation was
performed. You can click the label to sort by this column.
This field displays the status of the operation on the device such as Succeed,
Failed and Pending. You can click the label to sort by this column.
This field displays the total number of devices to which the operation is applied.
Click this to return to the previous screen.
215. To open this screen, click Log & Report in the menu bar and then
Vantage CNM User's Guide
Advertisement
Table of Contents
Troubleshooting
