Opening Vantage Report In Vantage Cnm; Figure 169 Log & Report > Vrpt (Vantage Report Main Screen) - ZyXEL Communications Centralized Network Management Vantage CNM User Manual

20.4 Opening Vantage Report in Vantage CNM

After you set up a Vantage Report in Vantage CNM (see
device that is managed by Vantage Report, and click Log & Report > VRPT. Then you can
see the device's relative reports displayed via Vantage Report in the Vantage CNM as shown
next.
Figure 169 Log & Report > VRPT (Vantage Report Main Screen)
If the device is not managed by any Vantage Report instance yet, the Vantage Report window
does not open, an error message appears to say this device is not associated with the Vantage
Report.
Vantage CNM User's Guide
Chapter 20 VRPT
Section 20.3 on page 294), select a
295