Vrpt Management; General; Figure 175 Cnm System Setting > Configuration > Vrpt Management - ZyXEL Communications Centralized Network Management Vantage CNM User Manual

Chapter 21 CNM System Setting

21.6 VRPT Management

Vantage CNM also includes Vantage Report. See
about Vantage Report in Vantage CNM.

21.6.1 General

Use this screen to manage the Vantage Report instances in Vantage CNM. To open this screen,
click CNM System Setting in the menu bar and then click Configuration > VRPT
Management in the navigation panel.
Figure 175 CNM System Setting > Configuration > VRPT Management
The following table describes the labels in this screen.
Table 150 CNM System Setting > Configuration > VRPT Management
LABEL
#
Name
Syslog Server Address
Version
Compatible
Status
Used/Max
Add
Renew
Edit
Remove
306
Chapter 20 on page 293
DESCRIPTION
This is the number of an individual entry.
This field displays the name of the Vantage Report instance in Vantage
CNM. Click the name to test whether the connection is ok.
This field displays the IP address of the Vantage Report instance.
This field displays the software version number of the Vantage Report
instance.
This field displays the status of the Vantage Report instance. The bulb
lights on when the Vantage CNM is able to connect to the Vantage
Report server. Otherwise, the bulb is off.
Click this to look at the number of registered devices in the VRPT
server and the maximum registered device number this VRPT server
allows to add in.
Click this to set up a new Vantage Report instance in Vantage CNM.
Click this to get the latest connection status between the Vantage
Report instance and the Vantage CNM.
Click this to edit an existing Vantage Report instance in Vantage CNM.
Click this to remove one Vantage Report instance.
for information
Vantage CNM User's Guide