Table of Contents
Advertisement
–
Adjust the control lever as shown.
Control lever External tank
is set to Vacuum and Oil reservoir
–
Activate On/Off switch
The suction process begins.
Pressure gauge
< 0 bar
200271-10
Vacuum gauge
4 mbar
–
Determine distance
voir hole with the special tool.
Depth micrometer (T107S) (
The floating piston is located in the lowermost position.
B04501-10
–
When the vacuum gauge reaches the required value, turn con-
trol lever Oil reservoir
Guideline
4 mbar
The pressure gauge increases to the required value.
0 bar
200267-10
–
When the pressure gauge reaches the specified value, turn
control lever Damper
Guideline
0 bar
Oil is pumped into the damper.
The pressure gauge increases to the required value.
3 bar
200268-10
–
When the pressure gauge reaches the specified value, turn
control lever Damper
Guideline
3 bar
The pressure gauge drops to the required value.
0 bar
200269-10
SHOCK ABSORBER, SWINGARM 9
3
is set to Closed, Damper
5
is set to Vacuum.
6
.
7
drops to the required value.
8
drops to the required value.
A
between the floating piston and reser-
p. 372)
5
to Equalize pressure.
4
to Pressure.
4
to Vacuum.
4
97
Advertisement
Table of Contents
