KTM 250 EXC TPI 2019 Repair Manual page 286

19 CLUTCH
284
–
Using a straightedge and the special tool, check the spring
washer for distortion.
Feeler gauge (59029041100) (
Spring washer distortion
» If the specified value is not reached:
–
Remove screws
marking II.
–
Using a straightedge and the special tool, check the spring
washer for distortion.
Feeler gauge (59029041100) (
Spring washer distortion
» If the specified value is not reached:
–
Remove screws
marking III.
R02791-10
–
Using a straightedge and the special tool, check the spring
washer for distortion.
Feeler gauge (59029041100) (
Spring washer distortion
» If the specified value is not reached:
–
Change the clutch facing discs.
–
Position the clutch cover with the gasket.
–
Mount and tighten screws
Guideline
Screw, intermediate
clutch cover
R02788-10
–
Attach spring
R02787-10
p. 369)
0 ... 0.10 mm (0 ...
0.0039 in)
3
and mount the spring retainer with
p. 369)
0 ... 0.10 mm (0 ...
0.0039 in)
3
and mount the spring retainer with
p. 369)
0 ... 0.10 mm (0 ...
0.0039 in)
2
.
M6 10 Nm (7.4 lbf ft)
1
.