–
Clamp the fork leg in the area of the lower triple clamp.
Clamping stand (T1403S) (
–
Remove screw
B04511-10
–
Loosen the screw cover
Ring wrench (T14017) (
Info
The screw cover cannot be removed yet.
B04512-10
–
Extract the fork leg and push the outer tube downward.
–
Pull the spring downward and push the open end wrench onto
hexagonal part
–
Hold the hexagonal part and loosen screw cap
take it off yet.
Ring wrench (T14017) (
B04524-10
–
Pull the spring downward. Remove the open end wrench.
–
Remove the screw cap.
B04526-10
–
Remove the spring.
–
Drain the fork oil.
Info
Pull out and push in the piston rod a few times to
pump the cartridge empty.
B04513-10
FORK, TRIPLE CLAMP 6
p. 374)
3
. Remove adjuster.
4
.
p. 374)
5
.
p. 374)
4
, but do not
21