6 FORK, TRIPLE CLAMP
44
–
Clamp the fork leg in the area of the lower triple clamp.
Clamping stand (T1403S) (
–
Remove screw
B04521-10
–
Loosen the screw cover
Ring wrench (T14017) (
Info
The screw cover cannot be removed yet.
B04522-10
–
Extract the fork leg and push the outer tube downward.
–
Pull the spring downward and push the open end wrench onto
the hexagonal part.
–
Hold the hexagonal part and loosen Preload Adjuster with spe-
5
cial tool
, but do not take it off yet.
Special socket (T14087) (
B04558-10
–
Pull the spring downward. Remove the open end wrench.
–
Remove the screw cap.
B04553-10
–
Remove the spring.
–
Drain the fork oil.
Info
Pull out and push in the piston rod a few times to
pump the cartridge empty.
B04513-10
p. 374)
3
. Remove adjuster.
4
.
p. 374)
p. 375)