KTM 250 EXC TPI 2019 Repair Manual page 204

18 ENGINE
202
–
Position the frame protector.
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount the cable ties.
–
Install the manifold. (
R02859-11
–
Mount the main silencer with rubber sleeve
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Connect the negative cable of the battery. (
–
Install the fuel tank. (
–
Install the air filter box cover. (
R02889-10
–
Mount the seat. (
–
Remove filler plug
oil.
Gear oil
–
Mount and tighten filler plug
R02890-10
Finishing work
–
Remove the motorcycle from the lift stand. (
(All Six Days models)
–
Install the engine guard. (
–
Refill with coolant. (
–
Go for a short test ride.
–
Check the engine for leak tightness.
–
Check the gear oil level. (
–
Check the coolant level. (
cs
with the washers.
M5 3 Nm (2.2 lbf ft)
p. 112)
ct
.
dk
with the washers.
M6 10 Nm (7.4 lbf ft)
p. 161)
p. 123)
p. 116)
p. 121)
dl
with the O-ring, and fill up with gear
0.80 l Engine oil
(0.85 qt.) (15W/50)
( p. 358)
dl
with the O-ring.
p. 12)
p. 74)
p. 288)
p. 295)
p. 287)