18 ENGINE
270
Guideline
Z distance (height of control
flap) (All 250 models)
Z distance (height of control
flap) (All 300 models)
–
Mount gasket
–
Push the control flap down all the way to the stop.
–
Mount ball socket
Info
The linkage may only be pulled upward slightly.
The control flap must not be swung upward.
–
Check the movement of the linkage.
D04412-10
Guideline
≤ 1 mm (≤ 0.04 in)
»
If the linkage is pulled up further:
–
Loosen lock nut
–
Turn the ball socket until the linkage reaches the right
length.
–
Tighten the lock nut.
–
Mount retainer
D04411-10
–
Position the gasket.
–
Position both covers.
–
Mount and tighten screws
Guideline
Screw, exhaust
control cover
D04410-11
49.0 mm (1.929 in)
49.5 mm (1.949 in)
6
.
7
.
8
.
9
.
bk
bl
and
.
M5
4 Nm (3 lbf ft)
Loctite
®
222™