KTM 250 EXC TPI 2019 Repair Manual page 60

6 FORK, TRIPLE CLAMP
58
–
Slide the cartridge all the way into the inner tube.
The hexagonal part of the cartridge engages in the inner
tube guide.
Info
When assembling, ensure that the cartridges are not
mixed up.
The cartridges with the holes are installed on the left.
The cartridge without the hole is installed on the right.
D04748-10
–
Mount and tighten tap compression
Guideline
Compression damp-
ing fitting
B04540-10
–
Mount special tool
Support tool (T14026S1) (
Info
The special tool must be used to prevent the adjust-
ing tube from being lifted and thus to prevent oil from
reaching the piston rod.
–
Clamp the fork vertically.
B04542-10
–
Fill with fork oil.
Fork oil per fork leg
Info
Pull out the piston rod and push back in a number of
times to bleed the cartridge.
7
.
M29x1 35 Nm (25.8 lbf ft)
8
on the piston rod.
p. 374)
635 ± 10 ml Fork oil (SAE 4)
(21.47 (48601166S1)
± 0.34 fl. oz.) ( p. 359)