KTM 250 EXC TPI 2019 Repair Manual page 36

6 FORK, TRIPLE CLAMP
34
–
Warm up the outer tube in area
ing.
Guideline
50 °C (122 °F)
–
Push the outer tube on.
–
Hold the lower sliding bushing with the longer side of the spe-
cial tool.
Mounting tool (T14040S) (
B03537-10
–
Press the outer tube all the way in.
–
Position the support ring.
–
Hold the seal ring with the shorter side of the special tool.
Mounting tool (T14040S) (
–
Press the outer tube all the way in.
B03538-11
–
Mount lock ring
Info
The lock ring must engage audibly.
B03527-12
–
Mount dust boot
–
Mount fork protector ring
B03520-13
–
Slide the cartridge all the way into the inner tube.
The hexagonal part of the cartridge engages in the inner
tube guide.
B04515-10
A
of the lower sliding bush-
p. 375)
p. 375)
2
.
1
.
B
.