–
Fill the damper cartridge about half full.
Shock absorber fluid (SAE 2.5) (50180751S1) (
–
Lubricate O-ring
Lubricant (T158) (
–
Mount the piston rod carefully.
B04472-10
–
Mount seal ring retainer
–
Mount lock ring
Info
Do not scratch the inside surface.
–
Pull out the piston rod until the seal ring retainer is flush with
the lock ring.
B04474-10
–
Mount locking cap
–
Bleed and fill the damper. (
–
Fill the damper with nitrogen. (
B04473-10
Alternative 1
–
Turn adjusting screw
to the last perceptible click.
–
Turn counterclockwise by the number of clicks correspond-
ing to the shock absorber type.
Guideline
Compression damping, low-speed
Comfort
B04468-10
Standard
Sport
–
Using an open end wrench, turn adjusting screw
wise all the way.
–
Turn counterclockwise by the number of turns correspond-
ing to the shock absorber type.
Guideline
Compression damping, high-speed
Comfort
Standard
Sport
–
Turn adjusting screw
ble click.
SHOCK ABSORBER, SWINGARM 9
3
of the seal ring retainer.
p. 360)
4
and slide it under the ring groove.
5
.
6
of the damper cartridge.
p. 96)
p. 99)
7
clockwise with a screwdriver up
18 clicks
15 clicks
12 clicks
2.5 turns
2 turns
1 turn
9
clockwise up to the last percepti-
p. 359)
8
clock-
95