KTM 250 EXC TPI 2019 Repair Manual page 150

14 WHEELS
148
–
Using a suitable tool, press bearing
the outside.
–
Remove spacing tube
D00212-10
–
Using a suitable tool, press bearing
the outside.
–
Check spacer washer
» If the spacer washer is damaged or worn:
–
Replace the spacer washer.
D00214-10
–
Position spacer washer
–
Press new bearing
inside.
Info
Only press the bearing in via the outer ring otherwise
the bearing will be damaged when it is pressed in.
D00215-10
–
Clean, grease, and mount spacing tube
Long-life grease (
–
Press new bearing
inside.
Info
Only press the bearing in via the outer ring otherwise
the bearing will be damaged when it is pressed in.
D00213-10
–
Grease new shaft seal ring
D00211-10
4
out from the inside to
5
.
6
out from the inside to
7
for damage and wear.
7
.
6
all the way in from the outside to the
5
.
p. 360)
4
all the way in from the outside to the
3
and press it in until it is flush.