6 FORK, TRIPLE CLAMP
36
Info
When assembling, ensure that the screw caps are
mounted correctly.
Rebound damping side – right fork leg, screw cap with
marking REB, red adjuster.
Compression damping side – left fork leg, screw cap
with marking COMP, white adjuster.
–
Pull the spring downward.
–
Mount the open end wrench on the hexagonal part.
–
Hold the open end wrench. Tighten the screw cover.
Guideline
Screw cap on piston
rod
Ring wrench (T14017) (
B04524-11
–
Push the outer tube upward.
–
Clamp the outer tube in the area of the lower triple clamp.
Clamping stand (T1403S) (
–
Grease the O-ring of the screw cover.
Lubricant (T158) (
–
Mount and tighten screw cap
Guideline
B04541-10
Screw cap on outer
tube
Ring wrench (T14017) (
–
Mount the adjuster.
–
Mount and tighten screw
Guideline
Screw, adjuster
B04511-11
Alternative 1
–
Turn compression adjuster
clockwise all the way.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
B04510-11
M12x1
25 Nm (18.4 lbf ft)
p. 374)
p. 374)
p. 360)
9
.
M51x1.5
40 Nm (29.5 lbf ft)
p. 374)
bk
.
M4x0.5
2.5 Nm
(1.84 lbf ft)
bl
and rebound adjuster
bm