–
Lift the swingarm and position the shock absorber.
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
R02835-11
–
Mount the chain.
–
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
R02834-10
–
Position the brake caliper.
R02832-11
–
Position the brake line in the guide.
R01254-10
–
Position the frame protectors on the left and right.
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount the cable ties.
R02830-11
Finishing work
–
Install the rear wheel. (
–
Check the chain tension. (
–
Remove the motorcycle from the lift stand. (
SHOCK ABSORBER, SWINGARM 9
2
.
M12
80 Nm (59 lbf ft)
Loctite
3
.
4
with the washers.
M5
3 Nm (2.2 lbf ft)
p. 145)
p. 150)
p. 12)
®
2701™
107