Zoom MRS-1266 Operation Manual page 70

Reference [Phrase Looping]
2.
Use the cursor left/right keys to bring up the
indication "UTILITY PHRASE" on the display, and
press the [ENTER] key.
The names and numbers of phrases in the phrase pool appear
on the display.
PHRASE PHRASE
PH000-00 PH000-00
3.
Turn the dial to select the number of the phrase you
want to edit.
When you press the PLAY [
played. If you select a number where no phrase is imported,
the indication "EMPTY" appears instead of the phrase
name.
4.
Press the [EDIT] key.
The phrase edit menu appears.
PH000-00 PH000-00
MEAS X02 MEAS X02
5.
Use the cursor up/down keys to call up the
parameter you want to edit.
• MEAS X xx (xx = 1 - 99)
You can set the number of measures in the range of 1 - 99.
• TIMSIG
You can set the time signature in the range of 1 - 8.
• START
You can adjust the phrase start point in minutes, seconds,
and milliseconds.
• END
You can adjust the phrase end point in minutes, seconds, and
milliseconds.
• NAME
You can specify a name for the phrase.
• LVL
You can adjust the phrase playback level in the range of
±24 dB.
6.
Use the dial and the cursor left/right keys to adjust
the setting value.
70
1 1
R
] key, the selected phrase is
0 0
• Adjusting MEAS / TIMSIG / LVL
Turn the dial to set the numerical value.
• Adjusting START / END
Use the cursor left/right keys to select the unit, and turn the
dial to set the numerical value.
• Adjusting NAME
Use the cursor left/right keys to select the character to edit,
and turn the dial to select the character.
H
INT
R
You can use the PLAY [ ] key to check the phrase both dur-
ing and after editing.
7.
Repeat steps 5 - 6 to complete the phrase.
If desired, press the [EXIT] key several times to return to the
screen of step 2, and select another phrase parameter.
8.
To return to the main screen, press the [EXIT] key
several times.
ZOOM MRS-1266