Adjusting The Eq - Zoom MRS-1266 Operation Manual

Quick Tour
TR1 TR1
PAN PAN
5.
Press the status key of the track whose panning
you want to adjust (or the [DRUM]/[BASS] status
key).
The selected status key lights up in orange. While the track
parameter menu is shown, the status key (or the cursor left/
right keys) can be used to select the track or drum/bass sound
to be adjusted.
TR2 TR2
PAN PAN
6.
Turn the dial to adjust the panning value.
The panning value can be adjusted in the range from L100
(far left) – 0 (center) –R100 (far right).
7.
Repeat steps 5 - 6 to adjust the panning value of
other tracks.
H
INT
For tracks 9/10 and the drum sound, the PAN parameter
functions as a BALANCE parameter that adjusts the volume
balance between the L/R channels.

■ Adjusting the EQ

8.
To adjust equalization for each track, press the [EQ
HIGH] key or [EQ LOW] key.
Press the [EQ HIGH] key to adjust the high-frequency
equalizer, or press the [EQ LOW] to adjust the low-
frequency equalizer.
TR2 TR2
EQ LOW G EQ LOW G
34
0 0
Panning value
0 0
0 0
9.
Press the status key of the track whose EQ you
want to adjust (or the [DRUM]/[BASS] status key).
10.
Use the cursor up/down keys to select the EQ
parameter that you want to adjust, and turn the dial
to modify the setting.
The available parameters and their ranges are as follows.
● [EQ HIGH] key pressed
• EQ HI G
Adjusts boost/cut in high frequency range: -12 - 0 - 12 (dB)
•EQ HI F
Adjusts turnover frequency for high-frequency boost/cut:
500 - 18000 (Hz)
● [EQ LOW] key pressed
•EQ LO G
Adjusts boost/cut in low frequency range: -12 - 0 - 12 (dB)
• EQ LO F
Adjusts turnover frequency for low-frequency boost/cut: 40
- 1600 (Hz)
H
INT
• When the EQ HI G / EQ HI F parameters are displayed in
the screen, you can press the [EQ HIGH] key to switch the
high-frequency EQ on/off. (The key will be out when this is
turned off.)
• When the EQ LO G / EQ LO F parameters are displayed in
the screen, you can press the [EQ LOW] key to switch the
low-frequency EQ on/off. (The key will be out when this is
turned off.)
11.
Adjust equalization for other tracks and for the
drum/bass sound in the same way.
12.
When you have finished creating settings, press
the [EXIT] key.
The unit returns to the main screen.
H
INT
Parameters set here can be saved in a scene (
→
p. 82).
ZOOM MRS-1266