Table of Contents
Advertisement
8.
When input is complete, press the STOP [
O
The REC [
] key goes out, and the display returns to the
rhythm song screen.
9.
Return to the beginning of the rhythm song and
R
press the PLAY [
The rhythm song you have created is played back. To stop
playback, press the STOP [
When the rhythm song is as you like it, press the [EXIT] key
to return to the main screen.
To change a chord setting, perform the following steps when
O
the REC [
] key is lit.
● Changing the entered root or chord type
Use the cursor left/right keys to call up the measure you want
to edit, and use the cursor up/down keys to bring up the
indication "ROOT" (for editing root information) or
"CHORD" (for editing chord information) on the display.
Then change the setting with the dial.
Change
1
2
C
1
2
C
N
OTE
When you change the root/chord information, the new
information will apply up to the next point where root/chord
information is input. Take care not to enter wrong
information.
● Deleting the entered root or chord type
Use the cursor left/right keys to call up the root/chord
ZOOM MRS-1266
P
] key.
P
] key.
3
F
G7
3
D
G7
] key.
information you want to delete, and press the [DELETE/
ERASE] key in the rhythm section. The entered root/chord
information is deleted, and the display indication changes to
"
ROOT" or "
1
1
N
OTE
When you delete the root/chord information, the previous
information will apply up to the next point where root/chord
information is input. Take care not to delete the wrong
information.
CHORD".
Delete
2
3
C
F
2
3
C
Quick Tour
G7
G7
27
Advertisement
Table of Contents
