Reference [Track Editing]; Editing By Rewriting Data; Basic Editing Steps - Zoom MRS-1266 Operation Manual

Reference [Track Editing]

Reference [Track Editing]
This section explains how to edit audio data contained on the tracks of the recorder section. There are two major types of editing
functions: directly rewriting waveform data and V-take editing.

Editing by rewriting data

The procedure for copying or moving a specified range by
directly rewriting the waveform data is explained below.

Basic editing steps

When editing by rewriting waveform data, some steps are
similar for each action. These are as follows.
1.
From the main screen, press the [UTILITY/TRACK
EDIT] key in the display section.
The utility menu appears on the display.
UTILITY UTILITY
TR EDIT TR EDIT
2.
Use the cursor left/right keys to bring up the
indication "UTILITY TR EDIT" on the display, and
press the [ENTER] key.
The track edit menu containing various editing commands
appears on the display.
TR EDIT TR EDIT
Copy Copy
3.
Use the cursor left/right keys to select the desired
command.
The following editing commands are available.
• Copy
Copy a specified range of audio data.
• Move
Move a specified range of audio data.
• Erase
Erase a specified range of audio data.
• Trim
Retain only a specified range of audio data and erase the rest.
54
• Fade I/O (Fade-in/out)
Perform fade-in/fade-out over a specified audio data
interval.
• Reverse
Reverse a specified range of audio data.
• Timstrch (Time Stretch/Compress)
Change the duration of a specified range of audio data
without changing the pitch.
4.
Press the [ENTER] key.
The screen for selecting the track and V-take for editing
appears.
The display shown below is an example for selecting the
copy command in step 3.
Copy Src Copy Src
TR 1- 1 TR 1- 1
Track number
5.
Turn the dial to select the track number (1 - 10), and
use the cursor up/down keys to select the V-take
number (1 - 10).
Copy Src Copy Src
TR10- 1 TR10- 1
On this screen, the stereo tracks 9/10 are treated as two
independent tracks. V-takes that are not currently selected
for tracks 1 - 10 can also be selected for editing.
When track 10 is selected, turning the dial further to the right
brings up the following screen.
Copy Src Copy Src
TR 1/2 TR 1/2
When this screen is shown, turning the dial to the right
selects tracks in odd-numbered/even-numbered pairs (1/2, 3/
4, 5/6, 7/8, 9/10) or the master track. In this case, the
currently selected V-take for the two tracks or the master
track becomes the editing target.
6.
Press the [ENTER] key.
V-take number
ZOOM MRS-1266