Loading Data From An Audio Cd - Zoom MRS-1266 Operation Manual

Loading data from an audio CD

The MRS-1266 can read audio data from an ordinary audio
CD inserted in the CD-R/RW drive and record the data on
any track of the internal recorder. The data can then be
handled and edited in the same way as other tracks.
H
INT
Data can be read only as entire audio CD tracks. Specifying
a range is not possible. If you want to use only a part of a
track, perform trimming of unwanted portions after loading
→
( p. 57).
1.
Insert the disc from which to load audio data into
the CD-R/RW drive.
2.
Perform steps 2 - 5 of "Playing an audio CD" and
select the desired track of the CD.
3.
O
Press the REC [ ] key.
READ DST READ DST
TR 1/2 TR 1/2
4.
Turn the dial to select the track for recording the
data.
Only odd-numbered/even-numbered pairs of mono tracks
(1/2, 3/4, 5/6, 7/8), the stereo track (9/10), or the master track
(MASTER) can be selected.
5.
Press the [ENTER] key.
The recording destination is selected, and the indication
"READ CD SURE?" appears on the display. (When the
track already contains data, the indication "OverWrt?" is
shown.)
6.
To carry out the read process, press the [ENTER] key
once more.
Loading data from the audio CD starts. When loading is
complete, the unit returns to the condition of "Playing an
audio CD" step 4.
7.
To return to the main screen, press the [EXIT] key
several times.
ZOOM MRS-1266
Reference [Creating a CD]
137