Table of Contents
Advertisement
Appendix
MODULATION/DELAY MODULE
TYPE
CHORUS
Stereo chorus with clear sound and great spaciousness.
FLANGER
An effect that adds a pronounced character and modulation to the sound.
PHASER
An effect that adds a swooshing modulation to the sound.
TREMOLO
An effect that cyclically varies the volume.
PITCH
An effect that modifies the pitch of the original sound.
RingMod
An effect that produces a metallic resonance.
DOUBLE
A doubling effect that allows the delay time to be set in 1 mSec steps up to 100 mSec.
Explanation of MODULATION/DELAY MODULE parameters
Parameter name
DEPTH
RATE
MIX
FB
TYPE = FLANGER : -10 – 10
COLOR
CLIP
SHIFT
TONE
BALANCE
TIME
■ MASTERING ALGORITHM
3BAND COMP/Lo-Fi MODULE
TYPE
PARAMETER 1
XOVER_Lo
MLT CMP
An effect that divides the input signal into three frequency bands, and lets you specify a compressor and mix amount for each band.
CHARA
Lo-Fi
An effect that intentionally degrades the audio quality of the sound.
Explanation of 3BAND COMP/Lo-Fi MODULE parameters
Parameter name
Range
XOVER_Lo
50 – 16000
XOVER_Hi
50 – 16000
SNS_HIGH
0 – 15
SENS_MID
0 – 15
SENS_LOW
0 – 15
MIX_HIGH
OFF, -24 – 6
MIX_MID
OFF, -24 – 6
MIX_LOW
OFF, -24 – 6
CHARA
0 – 10
COLOR
1 – 10
DIST
0 – 10
TONE
0 – 10
EFX LVL
0 – 30
DRY LVL
0 – 30
NORMALIZE MODULE
TYPE
NORMLZR
A module that lets you set the input level of the comp module.
Explanation of NORMALIZE MODULE parameters
Parameter name
Range
GAIN
-12 – 12
EQ MODULE
TYPE
3BandEQ
Three-band equalizer.
*For an explanation of the parameters, refer to the GUITAR/BASS algorithm.
ZNR MODULE
TYPE
ZNR
Zoom's proprietary noise reduction that minimizes noise when you are not playing.
*For an explanation of the parameters, refer to the GUITAR/BASS algorithm.
170
PARAMETER 1
DEPTH
DEPTH
RATE
DEPTH
SHIFT
RATE
TIME
Range
0 – 10
Specifies the depth of the effect.
1 – 30
Specifies the speed of the effect.
0 – 30
Adjusts the mix amount of the effect.
Adjusts the amount of feedback.
1 – 4
Modifies the type of phase tone.
0 – 10
Emphasizes the effect.
-12.0 – 24.0
Sets the amount of change produced by the pitch shifter.
0 – 10
Adjusts the tone.
0 – 30
Adjusts the volume balance between the direct sound and effect sound.
1 – 100
Specifies the delay time.
PARAMETER 2
PARAMETER 3
XOVER_Hi
SNS_HIGH
COLOR
DIST
Specifies the frequency at which the Lo/Mid bands will be divided.
Specifies the frequency at which the Mid/Hi bands will be divided.
Specifies the sensitivity of the compressor applied to the high range.
Specifies the sensitivity of the compressor applied to the mid range.
Specifies the sensitivity of the compressor applied to the low range.
Specifies the mix amount of the high range.
Specifies the mix amount of the mid range.
Specifies the mix amount of the low range.
Specifies the character of the filter.
Specifies the color.
Specifies the degree of distortion.
Adjusts the tone.
Adjusts the mix amount of the effect sound.
Adjusts the mix amount of the direct sound.
Explanation of parameter
Specifies the gain.
PARAMETER 1
HIGH
PARAMETER 2
RATE
RATE
COLOR
RATE
TONE
BALANCE
TONE
Explanation of parameter
PARAMETER 4
PARAMETER 5
SENS_MID
SENS_LOW
TONE
EFX LVL
Explanation of parameter
PARAMETER 1
GAIN
PARAMETER 2
MID
PARAMETER 1
THRSHOLD
PARAMETER 3
MIX
FB
--
CLIP
BALANCE
--
MIX
PARAMETER 6
PARAMETER 7
MIX_HIGH
MIX_MID
DRY LVL
--
PARAMETER 3
LOW
ZOOM MRS-1266
PARAMETER 8
MIX_LOW
--
PARAMETER 4
LEVEL
Advertisement
Table of Contents
