Linking Odd-Numbered/Even-Numbered Channels - Zoom MRS-1266 Operation Manual

H
INT
When the send/return effect parameter is shown on the dis-
play, you can temporarily turn the effect send off by pressing
the [REVERB]/[CHORUS/DELAY] key. For details, refer to
page 125.
6.
When you have finished making settings, press the
[EXIT] key.
The unit returns to the main screen.
Linking odd-numbered/even-num-
bered channels
Adjacent odd-numbered/even-numbered mono channels (1/
2, 3/4, 5/6, 7/8) can be linked and used as a pair of stereo
tracks. (This is referred to as "stereo link".) The parameters
and status keys of two stereo-linked channels will operate in
tandem. The setting procedure is as follows.
1.
Press the [PAN] key in the track parameter section.
2.
Press the status key (1 - 8) for one of the two
channels that you want to stereo-link.
3.
Press the cursor down key three times.
The ST LINK (stereo link) parameter screen appears.
TR7 TR7
ST LINK ST LINK
4.
Turn the dial to switch the setting ON.
Stereo linking will be enabled for the selected channel and
the adjacent odd-numbered/even-numbered channel. To
defeat stereo link, turn this parameter OFF.
TR7/8 TR7/8
ST LINK ST LINK
ZOOM MRS-1266
OFF OFF
ON ON
5.
Press the [EXIT] key.
The unit returns to the main screen.
H
INT
The PAN parameter of two stereo-linked channels will func-
tion as a BALANCE parameter that adjusts the volume bal-
ance between the odd-numbered / even-numbered chan-
nels.
N
OTE
To adjust the volume of stereo-linked channels, use the odd-
numbered fader. (The even-numbered fader will have no
effect.)
Reference [Mixer]
81