Send Return Effect - Zoom MRS-1266 Operation Manual

TYPE
VOL PDL
You can use an expression pedal to control the volume.
*For an explanation of the parameters, refer to theDUAL algorithm.
DIMENSION/RESONANCE MODULE
TYPE PARAMETER 1
RISE_1
DIMENSN
DIMENSN An effect that produces spatial width.
DEPTH
RESONNC
RESONNC A resonance filter with LFO.
Explanation of DIMENSION/RESONANCE MODULE parameters
Parameter name Range
RISE_1 0 – 30
RISE_2 0 – 30
DEPTH 0 – 10
FreqOFST
1 – 30
RATE 1 – 30
TYPE
HPF /LPF /bPF
RESO 1 – 30
EFX LVL 0 – 30
DRY LVL
0 – 30

Send Return effect

CHORUS/DELAY MODULE
TYPE PARAMETER 1
CHORUS
A stereo chorus that produces clear sound and a wonderfully spacious feeling.
DELAY
A delay effect of up to 1000 mSec.
DOUBLE
A doubling effect of up to 100 mSec.
Explanation of CHORUS/DELAY MODULE parameters
Parameter name
LFO TYPE
DEPTH
RATE
PRE DLY
EFX LVL
TYPE=DELAY:1 – 1000
TIME
TYPE=DOUBLE:1 – 100
FB
DAMP
REV_SEND
TONE
REVERB MODULE
TYPE PARAMETER 1
HALL
A reverb effect that produces the reverberation characteristic of a concert hall.
ROOM
A reverb effect that simulates the reverberation of a room.
Explanation of REVERB MODULE parameters
Parameter name
PRE DLY
REV TIME
EQ_HIGH
EQ_LOW
E/R MIX
EFX LVL
ZOOM MRS-1266
PARAMETER 2 PARAMETER 3
RISE_2
FreqOFST
Specifies the degree to which the stereo component is emphasized.
Specifies the spaciousness that includes the mono component.
Specifies the depth of the effect.
Specifies the LFO offset.
Specifies the speed of the effect.
Specifies the type of filter.
Adds character to the effect.
Adjusts the mix amount of the effect sound.
Adjusts the mix amount of the direct sound.
PARAMETER 2
LFO TYPE DEPTH
TIME FB
TIME TONE
Range
Mn /St
Selects the LFO phrase; Mn (mono) or St (stereo).
0 – 10 Sets the depth of the effect.
1 – 30 Sets the speed of the effect.
1 – 30 Sets the pre-delay time.
0 – 30 Adjusts the mix amount of the effect sound.
Sets the delay time. (TIME= setting value x 1msec)
0 – 10 Adjusts the amount of feedback.
0 – 10 Sets the amount of high-frequency decay for the delay sound.
0 – 30 Sets the amount of delay sound that is sent to reverb.
0 – 10 Adjusts the tone.
PARAMETER 2
REV TIME
PRE DLY
REV TIME
PRE DLY
Range
1 – 100 Specifies the pre-delay time.
1 – 30
Specifies the reverb time.
-12 – 6 Specifies the high-frequency volume of the reverb sound.
-12 – 6 Specifies the low-frequency volume of the reverb sound.
0 – 30 Specifies the volume of early reflections.
0 – 30 Adjusts the mix amount of the effect sound.
PARAMETER 1
MIN VOL
PARAMETER 4
-- --
RATE TYPE
Explanation of parameter
PARAMETER 3
RATE
DAMP
EFX LVL
Explanation of parameter
PARAMETER 3 PARAMETER 4
EQ_HIGH EQ_LOW
EQ_HIGH EQ_LOW
Explanation of parameter
PARAMETER 5 PARAMETER 6
-- --
RESO EFX LVL
PARAMETER 4
PRE DLY
EFX LVL
--
PARAMETER 5
E/R MIX
E/R MIX
Appendix
PARAMETER 7
--
DRY LVL
PARAMETER 5
EFX LVL
REV_SEND
--
PARAMETER 6
EFX LVL
EFX LVL
171