BHT-1500B Series
2.
Press the SCAN key to activate the Easy Pack Ad for BHT-1500.
The screen on the right appears.
− Point −
When the M1 key is pressed, the Easy Pack Ad for
BHT-1500 is activated in the same manner as for the SCAN
key. Note, however, that the screen in step 1 is no longer
displayed after this point. To turn the power OFF, press the
M2 key.
3.
When information loading is complete, the screen on the right appears.
− Note −
For information on how to use the "Easy Pack Ad for BHT-1500", first obtain the product from the
QBdirect service (http://www.qbdirect.net/) and then check how to use the software.
2.6 Turning OFF the Power
You can turn OFF the BHT in one of the following three methods.
Methods
Normal power OFF
Turning the power OFF
after data back-up
Auto power OFF
2.6.1
Normal Power OFF
1.
Press the Power key (
The BHT turns OFF after the message on the screen given to
the right displays.
− Point −
Do not remove the batteries while the message on the right
is displayed.
When the power is next turned ON, there are times when a
message "Contact your administrator. (XXXX)" displays
asking the user to contact the administrator.
20
Operation
Press the Power key (
).
Hold down the Power key (
least 3 seconds.
The power turns OFF itself when the
BHT is not used for specified period of
time set at the user program.
).
Data back-up timing
20 minutes after the power is turned
off
) for at
At the power OFF
20 minutes after the power is turned
off