Step 3 Turning On The Power - Denso BHT-805BW Operator's Manual

Step 3 Turning ON the Power

Turn ON the power after inserting the fully charged battery cartridge into the BHT.
The clock will not have been set at the time of purchase, and therefore it is necessary
to set the date and time when turning ON the power for the first time.
1
Press the power key
to turn ON the BHT
power.
2
Enter the date and
time using the numeric
keys.
[Ex.]: April 5, 2009, 14:20
Point
Enter the last two digits
for the year, and enter the
time in 24-hour clock
format.
3
Press the Enter key to
set the date and time.
4
Press numeric key [1]
followed by Enter and
select [1:Yes].
Point
By selecting [2:No], the
power turns OFF.
The screen below displays.
The screen below displays when
the date and time are set.
A scanning demo commences.
The scanning demo is a program
that allows
scanned without a user program.
Press the
enable barcode scanning.
Refer to "Scanning Barcodes" on
page 18 and scan a barcode .
16
barcodes to be
trigger switch to