Setting The Transmit Speed - Denso BHT-1505B User Manual



Setting the Transmit speed

Use the following procedure to change the Transmit speed setting.
1.
Select "2:TRANSMIT SPEED" at the HID menu and then press
the ENT key.
The HID SPEED menu screen on the right is displayed.
2.
Use the cursor keys ( [◀][▶] ) to hilight the item to be set, and then
press the ENT key.
The transmit speed set in this menu works in conjunction with the
"MAKE(Press)/BREAK(Release) interval" value which can be set or
obtained by using HID.FN3.
The "MAKE(Press)/BREAK(Release) interval" value will be changed
according to the transmit speed set in this menu as shown below.
HIGH=1
MID=10
LOW=30
The "MAKE(Press)/BREAK(Release) interval" set by
as follows.
1= HIGH
0,2～29=MID
30～255=LOW
BARCODE Handy Terminal
HID SPEED
1：SPEED
LOW
HID.FN3 will be displayed in the System menu
MID HIGH
113