Displaying The Authenticated Remote Device Addresses - Denso BHT-1505B User Manual



Displaying the authenticated remote device addresses

1.
Select "3: AUTH BD_ADDR" at the BROWSE DEVICE menu and
then press the ENT key.
A list of the authorized remote device addresses is displayed.
A maximum of three authorized remote device addresses is displayed.
Press and hold the BS/C key to return to the BROWSE DEVICE menu.
To delete the authorized remote device address, use the cursor keys ([▲]
[▼]) or numeric keys to select the desired address and then press the ENT
key.
The screen on the right is displayed.
To delete the selected address, select "1: Yes" and then press the ENT key.
To cancel deletion, select "2: No" and then press the ENT key.
The screen returns to the BROWSE DEVICE menu.
− Point −
Deleting the address may cause connection problems with
the link level security to the remote device that has the
deleted address. In this case, reconnect to the remote
device with the service level security.
BARCODE Handy Terminal
159