Setting Up Serial Port Profile (Spp) Service For The Connection Target - Denso BHT-1505B User Manual

BHT-1500B series

Setting up the serial port profile (SPP) service for the connection target
1.
Press numeric key [7] and the SF key simultaneously at the SET
MASTER menu to display the screen on the right.
[1: SPP SERVICE]:
Press and hold the BS/C key to return to the SET MASTER menu.
2.
Press the ENT key.
Entry mode is activated and the cursor is displayed.
3.
Use the numeric and period (.) keys to enter the serial port service
name of the destination.
Up to 12 characters can be entered. No default setting is defined.
To switch the entry mode (between numeric and alphabet entries), press the SF key.
To delete a single character, press the BS/C key. To delete the entire entry, press and hold the BS/C key
or press the SF and BS/C keys simultaneously.
4.
Press the ENT key.
5.
Press and hold the BS/C key to return the SET MASTER menu.
− Point −
If the target remote device has two or more serial port services, the link is established with
any of them. Specify the name of the serial port service you want to connect. For the service
name of the destination remote device, refer to "[3] BROWSE DEVICE menu" – "Searching
for services".
150
Sets up the serial port service name of the connection
destination.