Denso BHT-1505B User Manual page 219

Message
The BHT displays this error
message and automatically
runs the execution program
from the point of start-up.
After displaying this error
message, the BHT may start
a user program other than
the
execution program or display
the message "No execution
program loaded."
If this error occurs, the
warning tone beeps five
times.
The message is continuously
displayed.
BHT Response
Operation was terminated
without turning OFF the
power normally with the
resume function set, and
therefore resume info has
been lost.
Your settings made in
System Mode contain an
error.
preset auto-start
An error has occurred
during execution of
System Program.
An error has occurred
during execution of
System Program. The
application restarts from
the beginning.
Barode Handy Terminal
Cause Countermeasure
If this
frequently, make a note of
the displayed
contact
administrator.
Contact
administrator.
(If this error occurs, the
System Mode settings revert
to the factory defaults.)
Unload and reload the
battery cartridge, then turn
the BHT on.
If this error occurs
frequently, contact your
system administrator.
If this error occurs
frequently, contact your
system administrator.
error occurs
code and
your system
your system
207