Setting Up The Master Station - Denso BHT-1505B User Manual



Setting up the master station

1.
Select "3: MASTER" at the SET BLUETOOTH menu and then press
the ENT key.
The current settings are displayed.
[1: PEER BD_ADDR]: Sets up the remote device address of the connection
[2: PASSKEY]:
[3: TIMEOUT]:
[4: SECURITY]:
Press and hold the BS/C key to return to the SET BLUETOOTH menu.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to select the menu and then press
the ENT key.
Entry mode is activated and the cursor is displayed.
To set up the "4: SECURITY", use the cursor keys ([◄] [►]) to highlight and set the desired setting.
3.
Use the numeric and period (.) keys to enter the desired value.
"PEER BD ADDR":
"PASSKEY":
"TIMEOUT":
®
For the Bluetooth
®
"Bluetooth wireless communications".
To switch the entry mode (between numeric and alphabet entries), press the SF key.
To delete a single character, press the BS/C key. To delete the entire entry, press and hold the BS/C key
or press the SF and BS/C keys simultaneously.
4.
Press the ENT key.
5.
Press and hold the BS/C key to return the SET BLUETOOTH menu.
target.
Sets up the Bluetooth
station
Sets up the timeout period for connecting to the
master station in seconds.
Sets up the security mode for the master station.
The key Input and reading barcode is available.
Input Key:Input 12-digit hexadecimal numbers and press ENT key.
The ENT key is not available until the twelfth digit is entered.
Reading barcode:After reading a 12-digit hexadecimal barcode,the input mode is
automaticaly ended.
Up to 16 characters
Valid Range: 1–255, Default: 30 seconds
passkey and the security mode details, refer to Chapter 5 "Communication" – 5.3
BARCODE Handy Terminal
®
passkey for the master
149