Step 3 Turning On The Power - Denso BHT-700BB-CE Operator's Manual

Holding the BHT
Insert your hand into the hand belt and hold the BHT as shown below.

Step 3 Turning ON the Power

It is necessary to perform touch screen calibration and set the date and time when
turning ON the BHT power for the first time. Press the power key to turn ON the BHT
power. The calibration screen should then display.
If the calibration screen does not display, first perform a "full reset". Refer to
"Resetting and Full Resetting" (page 46) for details of the full reset method.
1
Press the power key to turn ON the
BHT power.
Step 2 Attaching the Stylus
Power key
22