Response Messages from the FTP server
The messages that FTP servers send during and after FTP operations vary, but servers all use the same
reply codes as listed below.
110: Restart marker reply
120: Service ready in approx. nnn minutes.
125: Data connection has been established. Start transferring.
150: File status okay: establishing data connection.
200: Command okay
202: No response to this command. Not required at this site.
211: System status, or system help reply
212: Directory status
213: File status
214: Help message
215: NAME system type
220: Service ready for new users.
221: Service closing control connection.
225: Data connection established: no transfer in progress.
226: Closing data connection.
227: Entering Passive Mode.
230: User logged in. Proceed.
250: Requested file process completed normally.
257: "PATHNAME" created.
331: User name okay. Password required.
332: Login account required.
350: Requested file process awaiting further information.
421: Service not available. Closing control connection.
425: Unable to establish data connection.
426: Connection closed: transfer aborted.
450: Requested file action not taken.
451: Requested action aborted: processing local error.
452: Requested action not taken.
500: Syntax error; command not recognized.
501: Syntax error in parameters or arguments.
502: Command not supported.
503: Incorrect command sequence
504: Command parameter not supported.
530: Not logged in.
532: File storage account required.
550: Requested action not taken.
551: Requested action aborted: page type unknown.
552: Requested file processing aborted.
553: Requested action not taken.
BARCODE Handy Terminal
145