Denso BHT-1505B User Manual page 68

BHT-1500B series
1.
Perform the settings for the master-side clone using "2: CLONE" and "3:OPTION" from the
SETUP menu.
Use the "OPTION" menu to perform settings such as the clone number, and authentication key.
"OPTION" menu content is as per the table below.
Item
1: CLONE NO.
2: SOFTWAVE TO
CLONE
3: AUTH KEY
4: SLAVE ACTION
5: FILE COPY MODE
2.
Select "1: MASTER" from the CLONE MENU on the msaster side.
3.
Select "2: SLAVE" from the CLONE MENU on the slave side.
56
Setting Content
1 to 6-digit numeric values
OS
Used 0 to16 one-byte
alphanumeric characters
(Entry possible in ALP
mode.)
Not used
Clone menu
BHT reboot
Clone mode
Makes the slave-side file
structure identical to the
master-side structure.
HT-HT copy mode
Leaves a copy of the
slave-side files.
Master Side
Default
Differentiates whether or not the beginning
of the number is padded with a "0" so that
the not only sequential numbers, but date
"0"
settings can be performed as well.
Ex.: The function differentiates between
"1" and "000001".
There are also OS settings and additional
YES files, but the aforementioned items are
always cloned.
Not used
BHT reboot: Restarts the BHT, then starts
Clone menu
the applications.
Clone mode
Slave Side
Remarks