Denso BHT-1505B User Manual page 143

3.
At the slave BHT to be tested, select "1: SLAVE", and at the
master BHT, select "2: MASTER". Then press the ENT key.
The screen on the right is displayed during the test, and an infrared
communication test is performed.
If an error occurs, the tested slave BHT buzzer beeps three times and
displays the screen on the right.
The meanings of the error codes in parentheses are as follows.
( X X )
1: The received data is different from the sent data.
2:
A timeout has occurred during standby for data
reception.
1: 9600 bps
2: 115200 bps
3: 460800 bps
Press and hold the BS/C key to return to the TEST COMMUNICATION menu.
The master BHT automatically returns to the TEST COMMUNICATION
menu 10 seconds after the occurrence of an error.
Upon normal completion of the test, the tested slave BHT buzzer beeps
once and displays the screen on the right.
Press and hold the BS/C key to return to the TEST COMMUNICATION
menu.
The master BHT automatically returns to the TEST COMMUNICATION
menu.
BARCODE Handy Terminal
131