Setting The Communication Environment - Denso BHT-1505B User Manual

[5] Setting the communication environment

The communication environment settings following system initialization are follows.
Do not change these settings unless necessary.
Interface to be used
TRANSMIT SPEED
Communication protocol
PROTOCOL
Use the following procedure if necessary to change the communication environment settings.
1.
Select "5: COMMUNICATION" at the SET SYSTEM menu and then
press the ENT key.
The SET COMMUNICATION menu screen on the right is displayed.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to highlight
the item to be set and press the ENT key.
"1: COM1":
Changes COM1 communication parameter settings.
2: PROTOCOL TYPE:
Changes the communication protocol settings.
3: OPEN "COM:" DETAIL:
Changes the communication conditions used by the user program (OPEN "COM:") developed with
BHT-BASIC.
Refer to the following section for details of the above items.
Press and hold the BS/C key to return to the SYSTEM MENU.
Item
COM1
Baud rate 115200 bps(only with the RS-232C and IrDA Interface)
Ymodem protocol
Protocol options SERIAL No.:
H. PARITY:
LINKUP TIME:
FIELD SPACE:
BARCODE Handy Terminal
Default
ON (Adds serial numbers to data
blocks.)
ON (Adds horizontal parity.)
30 seconds
Ignore (Trim)
SET SERIAL PORT
1：COM1
2：PROTOCOL TYPE
3：OPEN"COM："DETAIL
95