Denso BHT-1505B User Manual page 236

BHT-1500B Series
Error No.
The protocol specified at the BHT and PC
does not match.
The PC communication port setting is illegal.
Hardware malfunction
The protocol specified at the BHT and PC
53 does not match.
The protocol specified at the BHT and PC
does not match.
An attempt was made to download a file
55
whose field width is different from that of the
data file that already exists in the BHT.
Illegal characters have been used in the file
55
name.
71
The intended COM port number is already
used.
75
The intended COM port number is missing.
Illegal field information specification option
when transmitting data file.
An attempt was made to download a file with
field width differing from that of the data file
already existing in the BHT.
91
The size of the file being downloaded
exceeds the size of the available space in
the BHT user area.
Illegal characters have been used in the file
name.
BHT-Ir/BHT protocol was used for transfer
for a BHT-BASIC 4.0 format program file
Other (*.PD4).
An attempt was made to download a
BHT-BASIC 3.6 format program file (*.PD3).
224
Cause Details Remedy
Ensure that the protocol matches.
Please be aware that the default protocol differs
depending on the BHT used.
Enable "Use FIFO buffer. (16550 interchangeable
UART required.) (U)" setting for the communication
port used.
Please contact your dealer.
Ensure that the protocol matches.
Please be aware that the default protocol differs
depending on the BHT used.
Ensure that the protocol matches.
Please be aware that the default protocol differs
depending on the BHT used.
It is not possible to download a file with the same
name but different field width from the file already
existing in the BHT.
Either delete the existing data file in the BHT, or
specify the same field format as the existing data
file.
Change the file name.
Refer to QBdirect for details of characters
applicable to file names.
Use another COM port number or close the current
COM port.
Use the COM port number that is available.
Set a correct value for the field information option.
It is not possible to download a file with the same
name but different field width from the file already
existing in the BHT.
Either delete the existing data file in the BHT, or
specify the same field format as the existing data
file.
Reduce the file size or delete any unwanted files in
the BHT.
Change the file name.
Refer to QBdirect for details of characters
applicable to file names.
Use Ymodem protocol or convert program files to
"*.PD3".
Use BHT-BASIC 4.0 format program files (*.PD4).