Table of Contents
Advertisement
Commit the Configuration
Copyright © 2017, Juniper Networks, Inc.
Configure the Telnet service at the
7.
[edit]
root#set system services telnet
Display the configuration to verify that it is correct.
1.
[edit]
root@# show
system {
host-name host-name;
domain-name domain-name;
backup-router address;
root-authentication {
authentication-method (password | public-key);
}
name-server {
address;
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length;
}
}
}
}
Commit the configuration to activate it on the router.
2.
[edit]
root@# commit
Optionally, configure additional properties by adding the necessary configuration
3.
statements. Then commit the changes to activate them on the router.
[edit]
root@host# commit
When you have finished configuring the router, exit configuration mode.
4.
[edit]
root@host# exit
root@host>
hierarchy level.
[edit system services]
Commit the Configuration
63
Advertisement
Table of Contents
