Table of Contents
Advertisement
Copyright © 2017, Juniper Networks, Inc.
Figure 25: Aligning the MX2008 Router with the Rack Mounting Shelf
Unlock the four toggle latches that secure the router transport platform to the router
6.
transport mounting plate and wheel assembly.
Lift the wheels up by turning the handles counterclockwise so that the weight of the
7.
router is on the router transport platform.
Using a number 3 Phillips screwdriver, loosen the captive screws that secure the router
8.
transport mounting plates and wheel assembly to the chassis, and set them aside
(see
Figure 26 on page
Use the Router Transport Kit to Install the Router in a Four-Post Rack
34).
33
Advertisement
Table of Contents
