Table of Contents
Advertisement
MX2008 3D Universal Edge Router Quick Start
12
Figure 6: Mounting Hardware for a Four-Post Rack or Cabinet
Front
NOTE:
Because of the short lift capability of the pallet jack, we recommend that
you install the router on the bottom of the rack.
The two rear flanges on the four-post mounting shelf are adjustable from
24 in. (60.96 cm) through 30 in. (76.2 cm) to accommodate different types
of racks rails.
If you are installing the MX2008 router into a network cabinet, make sure
that no hardware, device, rack, or cabinet component obstructs the 24-U
rack space from access during installation.
24 in. (60.96 cm)
to 30 in (76.2 cm)
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Table of Contents
