Table of Contents
Advertisement
MX2008 3D Universal Edge Router Quick Start
40
Figure 31: Sliding the MX2008 into the Open-Frame Rack
0
0
NOTE:
A four-person team is needed to carefully guide the router into the
rack.
NOTE:
There must be a minimum of 24-U of usable rack space when you
install the MX2008 into a 24-U rack.
Remove the router transport platform, and set the platform aside.
9.
Secure the router to the rack by using the mounting screws provided by the rack
10.
manufacturer.
Visually inspect the alignment of the router. To verify that the router is installed properly
11.
in the rack, see that all the mounting screws on one side of the rack are aligned with
the mounting screws on the opposite side and the router is level.
Reassemble the router transport kit, and set it aside for future use.
12.
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Table of Contents
