Table of Contents
Advertisement
MX2008 3D Universal Edge Router Quick Start
Step 5: Reinstall Components
42
To reinstall the components in the router:
Take each component out of its electrostatic bag, and identify the slot on the
1.
component where it will be connected.
NOTE:
Remove the shipping covers before installing router components.
Slide each component into the chassis evenly so that it does not become stuck or
2.
damaged.
Tighten the captive screws, and secure all levers for each component.
3.
NOTE:
Make sure that all empty slots are covered with a blank panel before
operating the router.
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Table of Contents
